Garden Gate Supply & Installation in Derby
A well-fitted garden gate does more than just complete the look of your boundary — it controls access, improves security, keeps children and pets safely contained, and adds real kerb appeal to your property. At Fencing Company Derby, we supply and install the full range of garden gates for domestic and commercial properties across Derby and Derbyshire.
Whether you need a simple timber side gate to close off a passageway, a pair of driveway gates to secure your off-road parking, or a decorative pedestrian gate for your front garden, we'll measure up, recommend the right gate for your situation, and install it properly — hung level, closing cleanly, and built to last.
Types of Garden Gates We Install
Side Access Gates
The most common gate we install — closing off the passageway between your house and garden boundary. Typically 900mm–1200mm wide, built to match your rear garden fence height. Improves security and stops unwanted access around the side of your property.
Driveway Gates
Single and double driveway gates for properties with off-road parking. Available in timber or metal, as a single swing gate or a pair of gates opening from the centre. We can install on existing gate posts or supply and concrete new posts as part of the job.
Pedestrian Gates
Pedestrian gates for front gardens, pathways, and entrances. Decorative or plain, timber picket or close board style, with a range of ironmongery options. Ideal where you want to maintain a neat, welcoming front boundary without a driveway gate.
Security Gates
Heavier-duty gates for properties where security is a priority. Steel or metal construction, lockable hardware, designed to deter and delay unauthorised entry. Often installed alongside our security fencing for a complete perimeter solution.
Timber vs Metal Gates — Which Is Right for You?
The most common question we're asked when it comes to garden gates is whether to go for timber or metal. Both have genuine advantages — the right choice depends on your property, your budget, and what you want the gate to do.
| Feature | Timber Gates | Metal Gates |
|---|---|---|
| Appearance | Natural, warm, matches timber fencing perfectly | Smart, modern or traditional depending on style |
| Cost | Generally lower upfront cost | Higher upfront, lower long-term maintenance |
| Maintenance | Requires painting or staining every 3–5 years | Minimal — occasional repaint if powder-coated |
| Longevity | 15–25 years with proper maintenance | 25–40+ years |
| Security | ✓ Good with correct ironmongery | ✓ Excellent, especially steel |
| Matching fencing | ✓ Easy to match timber fence styles | Contrasting style — works well as feature |
| Bespoke sizing | ✓ Can be built to any size on-site | ✓ Available in custom sizes |
Gate Hardware, Hinges & Locks
A gate is only as good as its hardware. We fit quality ironmongery on every gate we install, including:
- Hinges — heavy-duty galvanised or stainless steel hinges rated for the weight of the gate, set at the correct angles to prevent sagging over time
- Latches — a range of latch styles from simple thumb latches to automatic-closing spring latches
- Locks and bolts — padlock hasps, drop bolts, mortice locks, and slide bolts for added security
- Gate closers — spring-loaded or hydraulic closers to ensure the gate shuts automatically behind you — useful if you have young children or pets
- Post caps and capping — protecting gate posts from weathering and improving the finished appearance
We'll discuss your hardware preferences during our free site visit and include all ironmongery in your written quote.
Getting the Fit Right — Why Professional Installation Matters
A garden gate that sags, drags on the ground, doesn't close properly, or has posts that aren't set square is not just frustrating — it's a security liability and will deteriorate faster than a correctly installed gate.
The most common reasons a DIY gate installation goes wrong are:
- Posts not set perfectly vertical or at the correct distance apart
- Insufficient concrete depth or cure time, causing posts to lean over time
- Hinges not rated for the weight of the gate
- Gate not sized correctly for the opening, causing it to bind or leave a gap
- Hardware fitted without adequate fixings into the timber or masonry
When we install your gate, we set posts in fresh concrete to the correct depth, allow proper cure time, hang the gate level and plumb, and test the full range of opening, closing, and latching before we leave your property.
Garden Gate Costs in Derby
Gate costs vary based on material, size, style, and whether new posts are needed. As a general guide:
- Timber side gate (standard) — typically £250–£450 fully installed including posts
- Timber driveway gate (single) — typically £350–£600 installed
- Timber driveway gates (double pair) — typically £600–£1,000 installed
- Metal/steel driveway gates — typically £700–£1,500+ depending on specification
- Gate repairs and re-hanging — typically £80–£200
We provide free, itemised written quotes. Call 01332 314109 or use the form below to get started.
Serving All Areas of Derby
We install garden gates across all of Derby including Allestree, Mickleover, Chellaston, Littleover, Chaddesden, Normanton, Alvaston, Spondon, Oakwood, and every other part of the city. View all areas we cover.